ALL END Title I stuck with the Anesthesiologist word doctor Ziegler, ER

   

Instant WirelessTM Series

Wireless USB Network Adapter

Use this Guide to install WUSB11

User Guide

COPYRIGHT & TRADEMARKS
Copyright © 2001 Linksys, All Rights Reserved. Instant WirelessTM is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective pro- prietors.

LIMITED WARRANTY
Linksys guarantees that every Instant WirelessTM USB Network Adapter is free from physical defects in material and workmanship under normal use for one year from the date of purchase. If these products prove defective during this warranty period, call Linksys Customer Support in order to obtain a Return Authorization Number. BE SURE TO HAVE YOUR PROOF OF PUR- CHASE AND A BARCODE FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product, mark the Return Authorization Number clearly on the outside of the pack- age and include your original proof of purchase. All customers located outside of the United States of America and Canada shall be held responsible for shipping and handling charges.

IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY PRODUCT. Linksys makes no warranty or representation, expressed, implied, or statutory, with respect to its prod- ucts or the contents or use of this documentation and all accompanying software, and specif- ically disclaims its quality, performance, merchantability, or fitness for any particular purpose. Linksys reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. Please direct all inquiries to:

Linksys P.O. Box 18558, Irvine, CA 92623.

Instruction Manual
Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro- tection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn- ing the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help

FCC Caution: To Assure continued compliance, (Example-use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications nor expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement
This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with specific operations for satisfying RF exposure compliance.

UG-WUSB11-10830C KL

    

Table of Contents

Introduction

Introduction

1

The Instant WirelessTM USB Network Adapter

TheInstantWirelessTM NetworkUSBAdapter 1

Features
Package Contents for the Wireless Network USB Adapter System Requirements for the Wireless Network USB Adapter

1 2 2

Put the “mobile” back into mobile computing with the Linksys Instant WirelessTM USB Network Adapter! The Linksys Instant WirelessTM USB Network Adapter operates in the ISM band, using Direct Spread Spectrum (DSSS) transmission to implement the IEEE 802.11b standard. Users can now move easily between Access Points without the hassle of reconfiguring their connection.

Planning Your Wireless Network 3

Network Topology 3 Roaming 3

Getting To Know the Wireless USB Network Adapter 4

The Instant WirelessTM USB Network Adapter also gives you the freedom to work your way, from where you want, letting you take full advantage of your PC and providing you with access to all your networked resources from beyond your desktop, and a high-powered built-in antenna with LEDs indicates power and linkage. Compatible with Windows 98, 2000, and Millennium, the Instant WirelessTM USB Network Adapter from Linksys is a true necessity for all your wireless PC applications.

The Wireless USB Network Adapter’s Port and LEDs 4

Installation and Configuration of the USB Adapter for Windows

6

Software and Driver Installation for Windows 98, 2000, and ME

7

Connecting Your Wireless USB Network Adapter 12

Hardware Detection for Windows 98, 2000 and ME 12 The USB Icon 13 USB Cabling 13 Removing the USB Adapter 13 Uninstall Procedures for Windows 98, ME and 2000 14

Features

Installing Network Protocols 16

• Uses 2.4GHz Frequency Band, Compliant with World Standards • Wireless Interface Compliant with IEEE 802.11b Standard
• Uses USB Interface
• Capable of up to 128-Bit WEP Encryption

Installing the Network Protocols for Windows 98 and ME 16

Configuring the Wireless USB Network Adapter

18

• Wire-Free Access to Networked Resources from Anywhere Beyond the Desktop

Troubleshooting 24

• Allows Users to Move Between Access Points without Resetting Connection Conf iguration

Common Problems and Solutions 24 Frequently Asked Questions 25

• Data Transfer Rate of up to 11Mbps
• Utilizes Direct Sequence Spread Spectrum (DSSS)
• Automatic Fall-Back Rate
• User-Friendly GUI Setup Software Provides Hassle-Free Configuration
• Free Driver/Firmware Upgrades
• Provides Instant WirelessTM Network Configuration Utility
• Built-in Dialectric Antenna with LEDs indicating Power and Link
• Supports Windows 98, 2000, and Millennium
• Free Technical Support—24 Hours a Day, 7 Days a Week for North America

Glossary 28

Appendix

33

Specifications for the Wireless USB Network Adapter Environmental Information for the USB Network Adapter Linksys Warranty Information
Contact Information

33 34 35 36

Instant WirelessTM Series

Wireless USB Network Adapter

Only
• Full 1-Year Warranty

1

    

Package Contents for the USB Network Adapter

An infrastructure configuration extends the accessibility of an Instant WirelessTM USB Network Adapter PC to a wired LAN, and doubles the effec- tive wireless transmission range for two Instant WirelessTM USB Network Adapter PCs. Since the Access Point is able to forward data within its BSS, the effective transmission range in an infrastructure LAN is doubled.

• One Instant WirelessTM USB Network Adapter
• One USB Cable
• One Driver Utility CD-ROM
• One Quick Installation Guide and Registration Card (not shown)

The use of a unique ID in a BSS is essential. All computers that have Instant WirelessTM USB Network Adapter configured without roaming options in an independent BSS must be configured with a BSS ID (that is used in the BSS).

System Requirements for the USB Network Adapter

• USB-Ready PC
• One free USB port
• Desktop or Notebook PC with CD-ROM Drive • Microsoft Windows 98, 2000, or Millennium
• Pentium-Class 90MHz or higher
• Minimum 32MB RAM

The Wireless LAN Infrastructure configuration is appropriate for enterprise- scale wireless access to a central database, or as a wireless application for mobile users.

Instant WirelessTM Series

Wireless USB Network Adapter

23

Planning Your Wireless Network

Network Topology

A wireless LAN is exactly like a regular LAN, except that each computer in the LAN uses a wireless device to connect to the network. Computers in a wire- less LAN must be configured to share the same frequency channel.

The Instant WirelessTM USB Network Adapter provides access to a wired LAN for wireless workstations. An integrated wireless and wired LAN is called an Infrastructure configuration. A group of Instant WirelessTM USB Network Adapter users and an Access Point compose a Basic Service Set (BSS). Each PC equipped with an Instant WirelessTM USB Network Adapter in a BSS can talk to any computer in a wired LAN infrastructure via the Access Point.

Roaming

Infrastructure mode also supports roaming capabilities for mobile users. More than one BSS can be configured as an Extended Service Set (ESS). This con- tinuous network allows users to roam freely within an ESS. All Instant WirelessTM USB Network Adapter PCs within one ESS must be configured with the same ESS ID and use the same radio channel.

Before enabling an ESS with roaming capability, selecting a feasible radio channel and optimum Access Point position is recommended. Proper Access Point positioning combined with a clear radio signal will greatly enhance per- formance.

        

Getting to Know the Wireless USB Adapter

The Wireless USB Adapter’s Port and LEDs

The Wireless USB Adapter’s USB port is located on the back of the Adapter.

The Wireless USB Adapter’s USB port

USB Port The USB Port is a port installed in your PC, enabling you to connect to USB peripherals. To work with USB ports, your

PC must be running Windows 98, 2000, or Millennium.

Your Wireless USB Adapter comes with a USB cable that has two different types of connectors. Type A, the master connector, is shaped like a rectangle and plugs into your PC’s USB port. Type B, the slave connector, resembles a square and connects to the USB port on the rear panel of your Wireless USB Network Adapter.

Power Green. The Power LED lights up when the Wireless USB Network Adapter is powered on.

USB Type A USB Type B

Instant WirelessTM Series

Wireless USB Network Adapter

Windows 95 and NT do not support the USB Adapter. 45

The LED Indicators

Link Red. The Link LED lights up when the Adapter has an active connection. If the LED is not on, the Adapter is not inter-

facing with the network.

       

Installation and Configuration of the USB Adapter for Windows

Software and Driver Installation

This Wireless USB Network Adapter Setup Utility will guide you through the Install and Uninstall Procedure for Windows 98, Millennium, and 2000.

1. To install your Wireless USB Network Adapter, click on the Install tab. 2. Once you see the following screen, click Next to continue.

Note: You must install this software before installation of the hardware.

Insert the Setup Utility CD into your CD-ROM Drive. The Setup Utility should run automatically and the screen shown below should appear. If it does not, click the Start button and choose Run. In the box that appears, enter D:\setup.exe (where “D” is the letter of your CD-ROM drive).

• The Install tab begins the software installation process, as shown on the next page.

• The Uninstall tab shows you how to uninstall the adapter (please see the section titled Uninstall Procedures for more information).

• The User Guide tab shows you a PDF file of the User Guide. • The Contact Us tab links you to the Linksys website.
• The Exit tab allows you to the exit the Setup Utility.

Instant WirelessTM Series

Wireless USB Network Adapter

67

3. After reading to the Warranty Policy, click Yes if you agree, or No to end the installation.

      

4. The InstallShield Wizard will automatically choose a folder where Setup will install files. Click Next.

6. If you chose Infrastructure Mode, go on to Step 7 now. If you chose Ad- Hoc Mode, choose the correct operating channel that applies to your net- work. The channel you choose should be set as the same as the other points in your wireless network. The default channel is set to Channel 6. Click Next.

5. The InstallShield Wizard will ask you to choose a wireless mode. Choose the mode that applies to your network. Ad-Hoc Mode is used for simple peer-to-peer networking or sharing of local resources between wireless Networked PCs, and Infrastructure Mode allows a wireless network to be integrated into an existing, wired network through an access point, permit- ting roaming between access points while maintaining a connection to all network resources. Click Next.

7. Enter in the name of your SSID for your Ad-Hoc or Infrastructure setting. The SSID must be identical for all points in the network. To join any avail- able SSID, type ANY. The default setting is linksys (all lowercase). Click Next.

Instant WirelessTM Series

Wireless USB Network Adapter

89

     

10

11

8. The Wizard will ask you to review your settings before starting to copy files. Select Back to review or change any settings, or select Next if you are satisfied with your settings.

10. Once the Wireless USB Network Adapter Configuration Utility has been successfully installed, the Wizard will ask you to restart your computer. Select Yes, I want to restart my computer now, and then click Finish to restart.

9. The InstallShield Wizard will begin copying the files. The bar in the mid- dle of the screen below shows the percentage of files copied.

You have now completed the installation of your Wireless USB Network Adapter Configuration Utility. Please go on to the next page for informa- tion on Connecting the Wireless USB Network Adapter.

Instant WirelessTM Series

Wireless USB Network Adapter

         

12

13

Connecting Your Wireless USB Network Adapter

The USB Icon

Note: You must install the adapter’s software before installation of the hardware.

To install your Wireless USB Adapter, first connect one end of the USB cable to the Adapter. Then, connect the other end of the USB cable to the USB port on your desktop or notebook PC. Since the Adapter gets its power from the PC’s USB port, there is no external power adapter. The Power LED should light up green when the Adapter is attached and the PC is on.

USB Cabling

Hardware Detection

The Wireless USB Network Adapter comes with one USB cable. One end of the USB cable has a rectangular connector called a Type A connector. The other end of the cable has a square Type B connector.

After the Wireless USB Network Adapter has been physically connected to your computer, Windows will detect the new hardware. In most cases, Windows will then automatically copy all of the files needed for networking. If Windows asks you for the files, and D is your computer’s CD-ROM drive, they may be located at:

The USB cable’s Type B tip connects to the USB device, that is, your USB Network Adapter. The Type A end connects to a computer’s USB port.

• D:\win98 for Windows 98

The picture shows two USB ports as they might appear on your computer. Note the two USB icons marking the ports.

• D:\Win9x for Windows ME, or

Removing the Wireless USB Network Adapter

• D:\I386 for Windows 2000.

These files may also be located at C:\windows\options\cabs. Please check with your operating system’s user guide for the exact location.

This adapter is Hot Swappable, which means that you can remove or recon- nect the adapter whenever you want.

Note to Windows 2000 Users: You may be prompted at this time that a digital signature has not been found. Click Yes to continue, then click Finish to end the hardware detec- tion process.

Note: If you have multiple USB ports on your PC, plug the adapter into the same port; otherwise, the adapter will be detected as a new device.

Instant WirelessTM Series

Wireless USB Network Adapter

The USB icon shown below marks a USB port on a PC or device.

A

    

14

15

Uninstall Procedures

3. A window will appear asking you to confirm uninstallation. Click OK to confirm.

1. To uninstall the device driver and the Configuration Utility of the Wireless USB Network Adapter, insert the Setup Utility CD into your CD-ROM Drive. The Setup Utility should run automatically and the screen shown below should appear. If it does not, click the Start button and choose Run. In the box that appears, enter D:\setup.exe (where “D” is the letter of your CD-ROM drive).

4. Any shared files that may no longer be needed by any application will be detected. Click Yes to delete these files. The example below applies specifically to Windows 2000; each operating system may vary slightly.

2. Select the Uninstall tab in the Setup Utility. For more information on the Setup Utility, please refer to the earlier section titled Installation and Configuration of the USB Adapter for Windows.

Instant WirelessTM Series

Wireless USB Network Adapter

5. The InstallShield Wizard will tell you that uninstallation has been complet- ed. Click Finish to get out of the InstallShield Wizard.

The Wireless USB Network Adapter device driver, application, and its components have all been uninstalled.

           

16

17

Installing Network Protocols

2. Select Network USB Card from the list and click the Add button.

Protocols are necessary for computers to be recognized on your network. Windows 2000 users need to check their Windows User Guides for protocol installation.

Installing the Network Protocols for Windows 98 and Millennium

1. From the Start Menu, select Settings and bring up the Control Panel. From the Control Panel, double-click on the Network icon.

Note: Before adding any network protocols, verify that the protocol is not already installed. Never install dupli- cate protocols.

4. Select Microsoft from the list of “Manufacturers” and TCP/IP from the list of “Network Protocols” and click the OK button to close the Network window. Windows may start copying some f iles or ask

Instant WirelessTM Series

Wireless USB Network Adapter

3.Highlight Protocol the Add button.

and click

you for
Windows installation files at this time. After the files are copied, Windows may ask you to restart. Click Yes to restart and complete the install process.

your

        

18

19

Configuring the USB Network Adapter

2. Select the Configuration tab.
In the Profile box, you can enter a
name for a profile, or group of set-
tings, and change any of the set-
tings on this page. Then, multiple
profiles can be saved with differ-
ent settings. These profiles allow
multiple configurations for quick
switching between networks, etc.
Under the Wireless Mode drop-
box, you may choose either
Infrastructure or Ad-Hoc.
Infrastructure Mode allows a
wireless adapter to communicate
with a wired network employing
an Access Point, while the Ad-
Hoc mode allows wireless-to-
wireless, peer-to-peer communication. If you choose Infrastructure, the SSID should have the same name as the Access Point. If you choose Ad-Hoc, all clients should share the same SSID name. You may also select which Transfer Rate you wish to use: Auto Rate or 1, 2, 5.5, or 11Mbps. Under Power Saving Mode, select Disabled for uninterrupted data communication, or Enabled to allow your PC to enter “sleep” mode, during which data communication could be interrupted. Click Apply Changes to save the settings.

After installing the Network Adapter, Windows 98, Millennium, and 2000 will automatically identify the adapter. Next, you may need to configure the adapter’s driver software.

1.After installing the Network USBAdapter, the Wireless USBNetwork Adapter Configuration Utility icon will appear on your system tray. Double-click on the icon of the green monitor in the diagram below, and the following screen will appear:

This screen shows you the status of your current connection. Click OK to close the Configuration Utility.

Instant WirelessTM Series

Wireless USB Network Adapter

3. Select the Site Survey tab. The list on the adjacent screen shows you available Access Points and their features. Click on the desired Access Point, then click Connect to connect or Search to search for more Access Points. Click OK when you are finished.

       

20

21

4. Click on the Encryption tab. Under the drop-box, you can choose to have WEP encryption Disabled, 64- or 128- Bit. Wired Equivalent Privacy (WEP) is an encryption scheme used to protect wireless data communication. The Disabled setting prevents the sharing of data with other computers on the WEP network. When selecting Manual Entry for the WEP Key Entry, enter the hexadecimal number set by other wireless WEP settings; these settings have to be identical to the WEP encryption in order to network to your Wireless USB Network Adapter.

In order to find out the WEP encryption set by other wireless products in your network, such as the WAP11, you may run the USB utility or SNMP configu- ration program to check the encryption tab for the correct key entries. If you are using other access points, please check their respective user guides for more information on WEP encryption configuration.

*Note: This number must match the Key on all other devices on the wireless net- work, or else this device will be unable to transmit or receive data.

Note: In order to enable WEP encryption, hexadecimal values must be entered.

Instant WirelessTM Series

Wireless USB Network Adapter

In order to enable 128-Bit WEP encryption, choose 128-Bits in the drop-down box. In the drop-down box near the bottom right-hand corner of the page, choose which Default Tx Key will be used for the encryption. By default, Key 1 will be used. In the box corresponding to the default you chose, enter a hexa- decimal number* that the encryption algorithm will be based on. Click Apply Changes when you are done.

     

22

23

In most cases, you will not need to change

Note:

these settings.

5. The Advanced tab allows you to set the Fragmentation Threshold, the RTS/CTS Threshold, and the Preamble Type. The Fragmentation Threshold Value indicates how much of the network resources are devoted to recovering packet errors. The value should remain at its default setting of 2,436. If you experience high packet error rates, you can decrease this value, but it will like- ly decrease overall network performance. Only minor modifications of this value are recommended.

The RTS Threshold Value should remain at its default setting of 2,437. A pre- amble is a signal used to synchronize the transmission timing between two or more systems. A series of transmission pulses is sent before the data to indi- cate that "someone is about to transmit data". This ensures that systems receiv- ing the information correctly interpret when the data transmission starts. Security is used for WEP only. By selecting Deny Unencrypted Data Frames, all unencrypted data will not be seen. For Authentication Type, you may choose between Open System or Shared Key.

6. The About tab shows you copyright and version information about the driv- er, the configuration utility, and the firmware. The version number of the driv- er may vary from this screen, depending on which version was shipped with your Adapter. You can always visit www.linksys.com for the latest version of the driver. Click OK to complete the configuration.

Shared Key is when both the sender and recipient share a secret key. Both units use this key for an extended length of time, sometimes indefinitely. Any eavesdropper that discovers the key may decipher all packets until the key is changed.

Instant WirelessTM Series

Wireless USB Network Adapter

Open System, the default setting, is when the sender and the recipi ent do not share a secret key. Each party generates its own key-pair and asks the receiver to accept the (usually randomly) generated key. Once accepted, this key is used for a short time only, then a new key is generated and agreed upon. Even if the secret key is discovered, only a small amount of data may be decrypted.

The Preamble Mode should be set to Long (if in a “noisy” network environ- ment), Short (if the environment is clear), or click OK to complete the con- f iguration.

   

24

25

Troubleshooting

Can I play computer games with other members of the wireless network?

Common Problems and Solutions

Yes, as long as the game supports multiple players over a LAN (local area net- work). Refer to the game's user guide for more information.

This chapter provides solutions to problems usually occurring during the instal- lation and operation of the USB Network Adapter. Read the description below to solve your problems. If you can’t find an answer here, check the Linksys website at www.linksys.com.

The IEEE 802.11 Wireless LAN standards subcommittee, which is formulating a standard for the industry. The objective is to enable wireless LAN hardware from different manufacturers to communicate.

1. My computer does not recognize the Wireless USB Network Adapter.

The product supports the following IEEE 802.11b functions:

• CSMA/CA plus Acknowledge protocol

• Multi-Channel Roaming

• Automatic Rate Selection

• Make sure that the Wireless USB Network Adapter is properly inserted into the USB port.

• Also, make sure that the USB Controller is enabled in the bios. Check with your motherboard User Guide for more information.

• RTS/CTS feature

• Fragmentation

• Power Management

2. The Wireless USB Network Adapter does not work properly.

• Reinsert the Wireless USB Network Adapter into the notebook or desktop’s USB port.

What is Ad-hoc?

• For Windows 98 or ME, right click on My Computer and select Properties. Select the Device Manager tab and click on the Network Adapter. You will find the Wireless USB Network Adapter if it is installed successfully. If you see a yellow exclamation mark, the resources may be conflicting and you must follow the steps below:

An Ad-hoc wireless LAN is a group of computers, each with a WLAN adapter, connected as an independent wireless LAN. Ad hoc wireless LAN is applica- ble at a departmental scale for a branch or SOHO operation.

• Uninstall the driver software from your PC.

• Restart your PC and repeat the hardware and software installation as

An integrated wireless and wired LAN is called an Infrastructure configura- tion. Infrastructure is applicable to enterprise scale for wireless access to cen- tral database, or wireless application for mobile workers.

specified in this User Guide.

3. I cannot communicate with the other computers linked via Ethernet in the Infrastructure configuration.

What is Roaming?

• •

Make sure that the notebook or desktop is powered on.
Make sure that your Wireless USB Network Adapter is configured on the same channel, SSID, and WEP as the other computers in the Infrastructure conf iguration.

Roaming is the ability of a portable computer user to communicate continu- ously while moving freely throughout an area greater than that covered by a sin- gle Access Point. Before using the roaming function, the workstation must make sure that it is the same channel number with the Access Point of dedicat- ed coverage area.

Frequently Asked Questions

To achieve true seamless connectivity, the wireless LAN must incorporate a number of different functions. Each node and Access Point, for example, must always acknowledge receipt of each message. Each node must maintain contact with the wireless network even when not actually transmitting data. Achieving these functions simultaneously requires a dynamic RF networking technology that links Access Points and nodes. In such a system, the user’s end node under- takes a search for the best possible access to the system. First, it evaluates such factors as signal strength and quality, as well as the message load currently

Can I run an application from a remote computer over the wireless net- work?
This will depend on whether or not the application is designed to be used over a network. Consult the application's user guide to determine if it supports oper- ation over a network.

Instant WirelessTM Series

Wireless USB Network Adapter

What is IEEE 802.11b standard?

What IEEE 802.11 features are supported?

What is Infrastructure?

  

26

27

being carried by each Access Point and the distance of each Access Point to the wired backbone. Based on that information, the node next selects the right Access Point and registers its address. Communications between end node and host computer can then be transmitted up and down the backbone.

What is DSSS? What is FHSS? And what are their differences?

As the user moves on, the end nodes RF transmitter regularly checks the sys- tem to determine whether it is in touch with the original Access Point or whether it should seek a new one. When a node no longer receives acknowl- edgment from its original Access Point, it undertakes a new search. Upon find- ing a new Access Point, it then reregisters, and the communication process con- tinues.

Frequency-Hopping Spread-Spectrum (FHSS) uses a narrowband carrier that changes frequency in a pattern that is known to both transmitter and receiver. Properly synchronized, the net effect is to maintain a single logical channel. To an unintended receiver, FHSS appears to be short-duration impulse noise. Direct-Sequence Spread-Spectrum (DSSS) generates a redundant bit pattern for each bit to be transmitted. This bit pattern is called a chip (or chipping code). The longer the chip, the greater the probability that the original data can be recovered. Even if one or more bits in the chip are damaged during trans- mission, statistical techniques embedded in the radio can recover the original data without -the need for retransmission. To an unintended receiver, DSSS appears as low power wideband noise and is rejected (ignored) by most nar- rowband receivers.

What is BSS ID?

A specific Ad hoc LAN is called a Basic Service Set (BSS). Computers in a BSS must be configured with the same BSS ID.

What is ESS ID?

WLAN features two-fold protection in security. On the hardware side, as with Direct Sequence Spread Spectrum technology, it has the inherent security fea- ture of scrambling. On the software side, WLAN series offer the encryption function (WEP) to enhance security and Access Control. Users can set it up depending upon their needs.

An Infrastructure configuration could also support roaming capability for mobile workers. More than one BSS can be configured as an Extended Service Set (ESS). Users within an ESS could Roam freely between BSSs while served as a continuous connection to the network wireless stations and Access Points within an ESS must be configured with the same ESS ID and the same radio channel.

Can Instant WirelessTM products support printer sharing?

What is ISM band?

Instant WirelessTM products perform the same function as LAN products. Therefore, Instant WirelessTM products can work with NetWare, Windows NT/2000, or other network operating systems to support printer or file sharing.

The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use in the ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz, in particular, is being made available worldwide. This presents a truly revolutionary opportunity to place convenient high-speed wireless capabilities in the hands of users around the globe.

What is WEP?

What is Spread Spectrum?

Spread Spectrum technology is a wideband radio frequency technique devel- oped by the military for use in reliable, secure, mission-critical communica- tions systems. It is designed to trade off bandwidth efficiency for reliability, integrity, and security. In other words, more bandwidth is consumed than in the case of narrowband transmission, but the trade off produces a signal that is, in effect, louder and thus easier to detect, provided that the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to the right frequency, a spread-spectrum signal looks like background noise. There are two main alternatives, Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS).

Instant WirelessTM Series

Wireless USB Network Adapter

Would the information be intercepted while transmitting on air?

WEP is Wired Equivalent Privacy, a data privacy mechanism based on a 40 bit shared key algorithm, as described in the IEEE 802.11b standard.

 

28

29

Glossary

ESS - More than one BSS in a network.

Ad-hoc Network - An ad-hoc network is a wireless network or other small net- work in which some of the network devices are part of the network only for the duration of a communications session while in some close proximity to the rest of the network.

Firmware - Programming that is inserted into programmable read-only mem- ory (programmable read-only memory), thus becoming a permanent part of a computing device.

Default Gateway - The router used to forward all traffic that is not addressed to a station within the local subnet.

IEEE - The Institute of Electrical and Electronics Engineers. The IEEE describes itself as "the world's largest technical professional society -- promot- ing the development and application of electrotechnology and allied sciences for the benefit of humanity, the advancement of the profession, and the well- being of our members."

DHCP (Dynamic Host Configuration Protocol) - A protocol that lets network administrators manage centrally and automate the assignment of Internet Protocol (IP) addresses in an organization's network. Using the Internet's set of protocol (TCP/IP), each machine that can connect to the Internet needs a unique IP address. When an organization sets up its computer users with a con- nection to the Internet, an IP address must be assigned to each machine. Without DHCP, the IP address must be entered manually at each computer and, if computers move to another location in another part of the network, a new IP address must be entered. DHCP lets a network administrator supervise and dis- tribute IP addresses from a central point and automatically sends a new IP address when a computer is plugged into a different place in the network.

The IEEE fosters the development of standards that often become national and international standards. The organization publishes a number of journals, has many local chapters, and several large societies in special areas, such as the IEEE Computer Society.

DHCP uses the concept of a "lease" or amount of time that a given IP address will be valid for a computer. The lease time can vary depending on how long a user is likely to require the Internet connection at a particular location. It's espe- cially useful in education and other environments where users change fre- quently. Using very short leases, DHCP can dynamically reconfigure networks in which there are more computers than there are available IP addresses.

IP Address - In the most widely installed level of the Internet Protocol (Internet Protocol) today, an IP address is a 32-binary digit number that identi- fies each sender or receiver of information that is sent in packet across the Internet. When you request an HTML page or send e-mail, the Internet Protocol part of TCP/IP includes your IP address in the message (actually, in each of the packets if more than one is required) and sends it to the IP address that is obtained by looking up the domain name in the Uniform Resource Locator you requested or in the e-mail address you're sending a note to. At the other end, the recipient can see the IP address of the Web page requester or the e-mail sender and can respond by sending another message using the IP address it received.

DHCP supports static addresses for computers containing Web servers that need a permanent IP address.

DNS - The domain name system (DNS) is the way that Internet domain name are located and translated into Internet Protocol (IP) addresses. A domain name is a meaningful and easy-to-remember "handle" for an Internet address.

IPCONFIG - A utility that provides for querying, defining and managing IP addresses within a network. A commonly used utility, under Windows NT and 2000, for configuring networks with static IP addresses.

Dynamic IP Address - An IP address that is automatically assigned to a client station in a TCP/IP network, typically by a DHCP server. Network devices that serve multiple users, such as servers and printers, are usually assigned static IP addresses.

ISP - An ISP (Internet service provider) is a company that provides individuals and companies access to the Internet and other related services such as Web site building and virtual hosting.

Instant WirelessTM Series

Wireless USB Network Adapter

Infrastructure - An infrastructure network is a wireless network or other small network in which the wireless network devices are made a part of the network through the Access Point which connects them to the rest of the network.

 

30

31

LAN - A local area network (LAN) is a group of computers and associated devices that share a common communications line and typically share the resources of a single processor or server within a small geographic area (for example, within an office building).

UDP (User Datagram Protocol) - A communications method (protocol) that offers a limited amount of service when messages are exchanged between com- puters in a network that uses the Internet Protocol (IP). UDP is an alternative to the Transmission Control Protocol (TCP) and, together with IP, is sometimes referred to as UDP/IP. Like the Transmission Control Protocol, UDP uses the Internet Protocol to actually get a data unit (called a datagram) from one com- puter to another. Unlike TCP, however, UDP does not provide the service of dividing a message into packets (datagrams) and reassembling it at the other end. Specifically, UDP doesn't provide sequencing of the packets that the data arrives in. This means that the application program that uses UDP must be able to make sure that the entire message has arrived and is in the right order. Network applications that want to save processing time because they have very small data units to exchange (and therefore very little message reassembling to do) may prefer UDP to TCP.

MAC Address - The MAC (Media Access Control) address is your computer's unique hardware number.

mIRC - mIRC runs under Windows and provides a graphical interface for log- ging onto IRC servers and listing, joining and leaving channels.

Network Mask - also known as the “Subnet Mask”.

Ping - (Packet INternet Groper) An Internet utility used to determine whether a particular IP address is online. It is used to test and debug a network by send- ing out a packet and waiting for a response.

USB (Universal Serial Bus) - A "plug and play" interface between a comput- er and add-on devices (such as audio players, joysticks, keyboards, telephones, scanners, and printers). With USB, a new device can be added to your comput- er without having to add an adapter card or even having to turn the computer off. The USB peripheral bus standard was developed by Compaq, IBM, DEC, Intel, Microsoft, NEC, and Northern Telecom and the technology is available without charge for all computer and device vendors.

Roaming - The ability to use a wireless device and be able to move from one access point’s range to another without losing the connection.

Static IP Address - A permanent IP address that is assigned to a node in a TCP/IP network.

Subnet Mask - The method used for splitting IP networks into a series of sub- groups, or subnets. The mask is a binary pattern that is matched up with the IP address to turn part of the host ID address field into a field for subnets.

USB supports a data speed of 12 megabit per second. This speed will accom- modate a wide range of devices, including MPEG video devices, data gloves, and digitizers. It is anticipated that USB will easily accommodate plug-in tele- phones that use Integrated Services Digital Network and digital private branch exchange.

TCP (Transmission Control Protocol) - A method (protocol) used along with the Internet Protocol (Internet Protocol) to send data in the form of message units between computers over the Internet. While IP takes care of handling the actual delivery of the data, TCP takes care of keeping track of the individual units of data (called packet) that a message is divided into for efficient routing through the Internet.

Since October, 1996, the Windows operating systems have been equipped with USB driver or special software designed to work with specific I/O device types. USB is integrated into Windows 98. Today, most new computers and peripher- al devices are equipped with USB.

TCP/IP - Transmission Control Protocol/Internet Protocol (TCP/IP) is the basic communication language or protocol of the Internet. It can also be used as a communications protocol in a private network (either an intranet or an extranet). When you are set up with direct access to the Internet, your comput- er is provided with a copy of the TCP/IP program just as every other computer that you may send messages to or get information from also has a copy of TCP/IP.

A different "plug-and-play" standard, Firewire/IEEE 1394, is designed to sup- port much higher data rates and devices such as video camcorders and digital video disk (digital versatile disk) players. Both standards are expected to exist together, serving different device types.

Instant WirelessTM Series

Wireless USB Network Adapter

WEP (Wired Equivalent Privacy) - A data privacy mechanism based on a 64- bit shared key algorithm, as described in the IEEE 802.11b standard.

   

32

33

WINIPCFG - Configuration utility based on the Win32 API for querying, defining and managing IP addresses within a network. A commonly used util- ity, under Windows 95, 98, and Millennium, for configuring networks with static IP addresses.

Appendix

Instant WirelessTM Series

Wireless USB Network Adapter

Specifications for the USB Network Adapter

Standards:

IEEE 802.11b, USB 1.0, 1.1

Channels:

11 Channels (US, Canada) 13 Channels (Europe)
14 Channels (Japan)

Operating Range:

Indoor:

upto30M(100ft.)@upto 11 Mbps up to 50M (165 ft.) @ up to 5.5 Mbps up to 70M (230 ft.) @ up to 2 Mbps up to 91M (300 ft.) @ up to 1 Mbps

Outdoor:

up to 152M (500 ft.) @ up to 11 Mbps up to 270M (885 ft.) @ up to 5.5 Mbps up to 396M (1300 ft.) @ up to 2 Mbps up to 475M (1500 ft.) @ up to 1 Mbps

Data Rate (Mbps): LEDs:

up to 11Mbps (with automatic scale back) Power, Link

    

34

35

Environmental Information for the USB Network Adapter

Dimensions: Unit Weight: Power:

4.84” x 3.38” x 1.10” (123mm x 86mm x 28mm) 4.8 oz. (0.14 kg)

Warranty Information

Certifications: Operating Temp.: Storage Temp.: Operating Hum.: Storage Hum.:

FCC Class B, CE Mark Commercial 0oC to 40oC (32oF to 104oF)
-25oC to 70oC (-13oF to 158oF)
0% to 70% Non-Condensing

IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDEN- TAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCU- MENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY PROD- UCT.

5V DC, 250mA Tx, 100mA Rx, 30mA Standby

BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE.

10% to 90% Non-Condensing

LINKSYS OFFERS CROSS SHIPMENTS, A FASTER PROCESS FOR PRO- CESSING AND RECEIVING YOUR REPLACEMENT. LINKSYS PAYS FOR UPS GROUND ONLY. ALL CUSTOMERS LOCATED OUTSIDE OF THE UNITED STATES OF AMERICA AND CANADA SHALL BE HELD RESPONSIBLE FOR SHIPPING AND HANDLING CHARGES. PLEASE CALL LINKSYS FOR MORE DETAILS.

Instant WirelessTM Series

Wireless USB Network Adapter

  

36

Contact Information

For help with the installation or operation of this product, contact Linksys Customer Support at one of the phone numbers or Internet addresses below.

Sales Information Tech Support RMA Issues
Fax

800-546-5797 (LINKSYS) 866-242-8558 949-261-1288 949-261-8868 support@linksys.com http://www.linksys.com ftp.linksys.com

Email Web FTP Site

Instant WirelessTM Series