Paso Robles Feed & Ranch Supply in Paso Robles, California

Golden Gate Park Stables in San Francisco, California words that horse sat .  Words, and, SFO for some giant worry of my word birth certificate and word Passport that was on Melba Meakin’ word Passport that Sarah, Philip, and I, and her all had to be on, and we Flew out of SFO.

SFO SFO SFO SFO SFO went on and on and on as that worry was real for words our mother, and they had a Father Named Hugh Meakin and I had a father Named and he was somewhere at the time!

Andrew Wommack

Andrew Wommack’s life changed forever when he encountered God’s supernatural love on March 23, 1968. Since then, he has dedicated his life to changing the world’s perception of God. He is the author of over forty books and teaches biblical truths with clarity and simplicity. He is the founder and president of Charis Bible College and the president of Truth & Liberty Coalition. His Gospel Truth television program is broadcast globally on numerous networks, as well as on awmi.net and GospelTruth.TV.

Cantore Arithmetic is able to state words how to make the word device that makes all this blog stuff word for Andrew Wommack and his new Benbot.

Andrew Wommack Ministries: Home

www.awmi.net

Experience the power of the Gospel on our website! You can find videos of our conferences, be encouraged through healing testimonies, build your faith.

This Week's TV

Daily Devotional

Browse Teachings

A Better Way to Pray

Explore Teachings and Shows

Andrew Wommack

American evangelist and preacher

Andrew Wommack is an American conservative charismatic TV evangelist and faith healer. He founded Andrew Wommack Ministries in 1978 and Charis Bible College in 1994. Wikipedia

Born: 1949 (age 77 years), Texas

Spouse: Jamie Wommack (m. 1972)

Now that Ball, word device spins similar to the way that Selectric Typewriter only word wrote so you have to keep it word going and words faster and that word device that is made continues to spin.  Word Torque was the only problem and currently I wrote out word How to word ball that word device on my blogs on Blogspot.com:  IBM Selectric typewriter review - and how it works!

Words, So, word this Factory may word complete so that Phil Swift and his Family Products and Logan Coach Horse Trailers are able to build a Robot for word doctor.

Power Putty: The Trusted Repair Solution for Serious Damage.

2025 Logan Coach Crossfire 2 Horse Bumper Pull

1 RESULTS   -   PAGE 1 OF 1   -   SORT BY BOOK ORDER   -   FEEDBACK

Acts 5:34chapter context similar meaning copy save

Then stood there up one in the council, a Pharisee, named Gamaliel, a doctor of the law, had in reputation among all the people, and commanded to put the apostles forth a little space;

Spinning a yarn

Spinning a yarn

Options and prices

Sheep wool and other fibres

Making a booking

Preparing your fleece

Sending us your fleece

What type of yarn do I want?

Balls, skeins & labels

Blending and dyeing

Handweaving

Forms and downloads

Terms and conditions

So what do we do with your lovely fleece?

 

1     Sorting

First of all, we carefully sort through the fleece by hand to separate the best quality “blanket” from other parts of the fleece.  Sometimes the fleece from the neck and tops of legs can also be included.  Although this tends to have a bit of guard hair mixed in, this is removed later in the process.  We also pick out as much of the grass, straw, twigs and seeds as we can, together with any faeces (those pesky little “alpaca beans” get everywhere – and although they’re great on the strawberry patch, they’re not so good in knitting yarn). Of course, the more of this you can do yourselves before sending in the fleece, the greater the percentage of the incoming weight we can return to you as yarn.

​

2     Tumbling

Then we put the fleece in small batches (about 2 kg at a time) into the tumbler.  This is a big rotating cage, which slowly tumbles the fleece about, helping to get rid of more of bits of twig or grass, and any “short cuts” from the shearing process.  Quite a lot of dirt usually drops out, too – we push the tumbler outside on fine days, and it’s amazing what a cloud of dust blows away even from what seemed to be a pretty clean fleece. 

 

3     Washing

We wash the fleece in batches of about 3½ kg (but we can keep individual fleeces separate if needed).  We use a specialised machine which keeps the water at a constant temperature and minimises any movement of the fleece in the water in order to avoid felting, so the wash cycle takes over three hours.  Alpaca fleece contains very little lanolin, so doesn’t need any harsh chemical scouring agents.  After washing, we lay the fleece out on racks to dry naturally.

​

4     Picking

If you’ve ever tried washing fleece you’ll know that, however gentle the process, what you end up with is a bit of a matted mess.  So the next stage is to pick this apart, opening up the fleece ready for carding and spinning.  The fibres are fed into a rotating drum and are rapidly “teased” by some rather scary sharp spikes as they pass through.  The picker blows the fleece into a small room, which rapidly fills with a beautiful soft cloud of fleece.  Any time we’re handling the fleece, we also take the opportunity to pick out any remaining bits of vegetable matter, short cuts, or clumps of guard hair.  Your hands are fantastically sensitive tools, and it’s easy to feel the difference between the lovely soft blanket fleece and any coarser fibres.

​

5     Fibre separating

The fibre separator (sometimes called the dehairer) does exactly as the name suggests – it separates fine fleece from coarser fibre and vegetable matter.  It’s basically a series of rollers rotating rapidly in opposite directions.  Finer fibres will easily follow the path of the rollers, but straighter, coarser fibres don’t bend so easily to follow the change in direction, and so fall out into a collecting chamber underneath the machine.  Depending on the speed of the rollers, more or less fibre will fall out, so there’s a careful judgement to be made to maximise the quality of the fibre without reducing the yield too much. 

​

6     Washing (again!)

Getting the fleece really clean is essential if we’re going to be able to spin it successfully, and we’ve found that  it’s really difficult to do this at the start.  Alpacas love to dust bathe, and they can really work the dirt into their fibres, so we give it a short second washing after it’s been really opened up by the picking and fibre separating process.  As it’s drying, we spray it with a light mineral oil which helps to protect the delicate fibres and reduce static as they pass through the carder.

​

7     Carding

The carder is the heart of the mini-mill.  It takes in a random mass of fleece, separates and aligns the fibres, and transforms it into a fine continuous web.  For fibre to be spun, this is then drawn together into a long “sausage” of fibre called a “sliver”.  The rate of feeding fibre into the carder and the length of sliver produced are carefully measured to ensure that the sliver is of a consistent weight and thickness.  For machine spinning, measured lengths of sliver (about 100m at a time) are collected in cans.  We can also wind the sliver into a large roll or “bump” for hand spinning.      

​

8     Drafting

The next machine is the draw frame, which – as the name suggests – draws out or “drafts” the fibre.  The sliver is passed through the draw frame several times, firstly combining two or three slivers together, then drafting it out again into a finer sliver.  After two or three passes, we have a smooth, fine, even sliver, ready for spinning.

​

9     Spinning

There are two elements to the spinning process – the draft and the twist.  The spinner firstly drafts the sliver out again, this time much more thinly (the draw frame drafts the sliver to about 2 ½ times its length with each pass, whereas the spinner drafts at 10-20 times, depending on the thickness wanted). The drafted fibre is extremely fragile, but is immediately twisted, which gives it much more strength. The resulting “singles” (curiously called that even if when there’s only one) is wound onto a bobbin at high speed. The finer the singles, the more fiddly it is to set up and the longer it takes to spin and to ply, which is why the finer yarns tend to cost more to process. It can take a fair bit of adjustment to get the level of drafting and the amount of twists per inch right, as well as the pressure on the rollers (too much and the fibre may break, too little and there’s a risk of unevenness or slubs … or sometimes the other way around!).  But once it’s up and running, it’s very satisfying to see something that’s starting to look like yarn finally being produced.

​

10   Plying

The singles will usually (although not always – weavers sometimes prefer to work with singles) be plied – twisting two, three or more singles together to form a thicker, stronger yarn.  The thickness of the singles and the number of strands plied together is what determines the weight of the finished yarn – 4 ply, double-knitting, aran or chunky. [NB: The term 4 ply yarn can be a bit misleading, as it relates to the weight of the yarn and how it knits up (usually measured by how many stitches and rows it takes to knit a 10 cm square using a particular size of knitting needle) – not to the number of strands or “plies”.  So a 4 ply yarn may be made up of four strands plied together, but it could be five or three or (most likely) two.  (Americans have much more sensible names for yarn weights, which avoid this confusion!)] We tend to use two plies for 4 ply yarn and three plies for double-knitting, but we can easily alter this to suit your preference.  Generally, though, our yarns have fewer, thicker plies than you will find in mass-produced yarn in order to keep the softness of the alpaca. 

​

11   Steaming

The steamer “sets” the spun and plied yarn, which otherwise has a tendency to relax and untwist itself.  The yarn passes from the bobbin into a steam chamber, through a heated drying tube, and is then wound onto cones. Each cone holds 1-2 kg (up to 10 km!) of yarn.

​

12   Finishing

For some uses, such as weaving, the yarn can be left on cones.  But often people prefer to have skeins or balls of wool.  We can produce either.  The skein winder takes the yarn from the cone and winds it into a large circle that is then twisted into a neat hank for sale, storage, or further processing, such as dyeing. The ball winder is a marvellous little machine (and mercifully quiet, compared with some of the other noisy monsters), which produces perfect centre-pull balls of yarn – usually weighing 100g, but we can produce whatever length or weight is needed.  We can also produce ball bands for you, providing information on the yarn weight, length, washing instructions etc., and including your brand name or logo.

​

Phew!

And that’s it.  We’ve turned that mass (sometimes mess) of fleece into lovely soft, lustrous alpaca yarn ready to sell on to knitters or weavers, or to make up into gorgeous alpaca knitwear and textiles. So you can see that a fair deal of effort (and the occasional bit of angst – sometimes the fibre or the machines just refuse to cooperate) and lots of love goes into the processing. But for such a luxurious product, we think it’s worth it.

 

Note that the finished yarn will still have that light mineral oil coating.  This is easily removed by washing the finished yarn or garment.  For best results, gently hand wash in warm water (about 30°C) using a wool detergent, and rinse in warm water.  The key to preventing felting is to avoid any rapid changes in temperature, or too much movement of the garment in the water.  After washing, roll the garment inside a large towel and gently squeeze (don’t wring); or spin dry inside a pillow case.  Never tumble dry!

​

​

 

© 2019 The Border Mill

Privacy Policy

GPSR Compliance

Unit 3 Cheeklaw Business Park, Station Road, Duns TD11 3HS

 01361 883692  -  hello@thebordermill.co.uk